Transmission3D
約3か月ぶりの更新です。
モジュールは弊社ＨＰからダウンロードできます
以下、リリースノート。
2018/05/13
==========
1) Added 4 point bearing feature.
2) Added journaling capability to multyx. When multyx is used from
Guide, or directly from the command line, all the users inputs
are journaled to a file calyxtmp/multyxjournal<date>.txt.
This journal can be used either for troubleshooting, or
to create batch file inputs.
3) Added roller and race tabular modifications for
thrust roller bearings.
4) Added bearing defect (pit) capability. Elliptical pits can be
created on the roller, inner race and outer race for
bearings with TYPE=GENERAL, TAPER or BALL.
5) Added an option to allow rollers to spin about their axis.
Without this option, rollers simply orbit without spinning.
Turn OFF the FIXEDROLLER option to allow the roller to spin.
This will be essential for correctly computing the rolling and
sliding velocities in the bearing, and also for correctly
predicting the response due to pit defects on the roller surface.
6) iGlass, Guide, multyx, cvtabq and calyx are now running under Wine on
on newer Linux distro.
7) Improvements to Nastran condensed file reader. Now
there is no need to remove the GRID and SPOINT cards from the file.
8) Bug Fix: The Abaqus file converter was crashing when
an Abaqus file has a space after a command.
9) Bug Fix: The Abaqus file converter was crashing when
an Abaqus file has a command with a comma after the last record.
10)Bug fix: Memory leak was fixed.
11)Bug fix: T3D mesh generator was crashing for hypoid gears with a
a secondary or tertiary cone angle of 90 degrees.
12)Bug fix: The spherical roller bearing mesh generator was not
working correctly when the AXPOSN1 and AXPOSN2 values for the outer race
were not equal and opposite.
13)Added an additional check for spherical bearings. We are now
checking to make sure that the radius of curvature of the inner and outer
grooves is not smaller than the crown radius of the roller.
Hypoid-FaceMilled Rev188, Hypoid-FaceHobbed Rev150, Hypoid-K Rev33
更新内容は、全て共通の計算速度向上です。
こちらのモジュールも弊社ＨＰからダウンロードできます。
