ANSOL T3D R378 がリリースされました。弊社ダウンロードサイトには、
Windows版、RedHat7.2版、RedHat6.4（GPU非対応）版がアップロードされています。
リリースノート
Rev 378 2023-01-27 15:44:47
Author: sandeep
2023/01/11
==========
Release Notes:
1) Implemented Front- and Back-Contact on the inner and
outer races of pinion bearings defined within the
CARRIER|PINION|BEARING submenu.
2) Implemented a new PAIR type: PINIONSHAFT_PINIONSHAFT.
3) Bug fix: The surface name shown for member 2 under
EDIT|PAIRS, when TYPE=PINIONSHAFT_PINIONSHAFT was
incorrectly mapped to the surface name for member 1.
4) Added a new EXPORTOPTION of NODAL_LOADS in the
EXPORTFEMODEL menu, when in post-processing mode.
This new option will cause it to omit everything but
the header, nodal loads, and footer to the output file.
5) Increased the limit on the value of NFACEELEMS
for a worm gear from 32 to 64.
6) Added option to import POINTCLOUD with webs for
straight bevel gears
7) When assembling a Proto's stiffness matrix into the system
stiffness equations, we were throwing an error if the
proto's stiffness matrix has zeroes on the diagonal. But
it is possible that subsequent assembly of bearing
stiffness matrices could mitigate this problem. If they
don't then the system stiffness matrix will be singular and
we will get an error message anyway. So the error
message was converted to a warning message.
8) Bug fix: The values the outer circular and axial
orders of a pinion shaft segment were being checked
for consistency, even if the OUTERRACE checkbox
was not turned on. This was generating unnecessary
error messages.
9) Bug Fix: The conical pinion hole feature was not
working correctly when carrier had non-zero axial shift
10) Bug Fix: The ADDBASESHAFT macro in the hypoid menu
was not working correctly when BASESURFACETYPE=CYLINDER.
11) Bug fix: A bevel tooth was not displayed in iSys
when BASESURFACETYPE=UNION
12) Bug fix: In the BEVEL|TOOTH menu, the BASECYLINDERDIAMETER
item was not being shown when BASESURFACETYPE=UNION
and TOOTHTYPE=SIMPLE.
13) Bug Fix: Fixed the shaft segment constraint and race
checkbox visibility in iSys
14) Bug Fix: Coincident nodes in an imported housing or
carrier that lie on a substructure boundary,
were being merged even when their node IDs were different.
15) Bug Fix: Corrected the reported location (s,t) of
the maximum load intensity in the header of the
EDGELOAD graph/outfile file.
16) Bug fix. The RootApex variable was uninitialized in the
Coniflex Bevel gear mesh generator.
17) Bug Fix: The value of SPEEDFACTOR in the PATTERN
menu was not being used.
18) Bug Fix: Removed out the template file selection in the
worm COMMON menu since a fixed template is used.
19) Bug fix: The carrier component mappings were not
set correctly when the carrier has both helical
pinions, as well as bevel pinions.
20) Bug Fix: Fixed an issue in writing PATTERN results
to database output.
21) Bug Fix: The face milled mesh generator was
crashing when the Flankrem option was turned on for a cutter.
22) Bug Fix: FATIGUE post-processing crashed when
analyzing fillet surfaces which are part of
multiple meshes(such as the fillet surface of a gear tooth with a crack.
Now an error message is displayed, and the user is asked to process
each instance (tooth) separately.
23) The estimated torque acting on the HYPOID in a
SUN-HYPOID pair was incorrect. It has been corrected.
24) Updated the Transmission3DExamples manual, and the
MultyxPreandPostProcessingManual.
25) Fixed the python scripts for generating CAD files, so
that they work with Python 3.7.
26) Fixed the RearAxleDynamics sample in SAMPLES/RearAxleDynamics
It was broken and not running.
( SAMPLES/RearAxleDynamics下にアップされています）
