2016/11/01 Rev310がリリースされました。弊社サイトからダウンロード可能です。
今回から、Linux64版もアップしています。
Rev 310 – 2016-11-01 09:56:54 -0400 (Tue, 01 Nov 2016)
install/T3D/Transmission3D_iSys_x64_Rev310.msi
install/T3D/T3DDistrib_Rev310_Rhel6.4.tar.gz
リリースノート
Log message: 2016/11/01
==========
1) Added crack discontinuity feature for RING, SUN and
HYPOIDs. Not yet added for pinions. The crack discontinuity
is created in the first tooth (instance) only. The user
specifies two disjoint sets of elements. A displacement
discontinuity and a contact surface is created at the
interface between the elements of these two sets.
This is useful for studying the effect on tooth load sharing,
load distribution and deformation of the discontinuity.
Not to be used for crack growth calculation, or for calculating
the stress near the discontinuity.
2) Added a roller offset for the spherical bearings. This allows the
reference section of a roller to be offset from the
middle of the roller.
3) Bug fix: iSys was not passing on the value of the
ROOTAPEX to the mesh generator.
6) Bug fix: iSys was not triggering a 3D view refresh when the
SPEIFYMEANCONE check-box or the MEANCONEDIST value is changed.
4) Bug fix: The conformal contact was not working well when the conformal
surfaces have large curvature.
5) Bug fix. The LoadSPA button was not correctly loading the tooth
thickness for a hypoid pinion/gear.
7) Added script HypoidSurfaceCoordinate.cmd to calculate coordinates
of a point on the hypoid surface.
8) Bug Fix: Fixed problem with convergence in face-hobbed mesh generator
for one example.
9) Bug fix: The OutputLoadData() script function was crashing calyx
when used with conformal contacts with zero relative curvature.
10)Bug fix: Calyx was crashing while searching for candidate points.
